Epson EMP-TWD1 Designated time playback (time search)

Designated time playback (time search)

Set to the [Function] position before performing operations

You can playback from a specified time position. Depending on the disc, the start point position varies as follows.

Time elapsed from the start of the title

When executing from stopped: Time elapsed from the start of the disc

When executing during playback: Elapsed time from the start of the current track being played

1 Press twice during playback or when stopped.

The following menu bar is projected.

Status bar

			Menu bar
	•			This function can only be used during playback.
	•				Cannot be used when playing back using the PBC
		function.
2	Press			until the pointer reaches		.
3	Press			.
4	Enter the time using the numeric buttons.

•The start position is specified in hours/minutes/seconds. You can leave out the minutes/seconds if desired.

• The start position is specified in minutes/ seconds.

Entering the time

Example)

To playback from 0 hours, 23 minutes, and 45 seconds

Set the Function/Numerics toggle switch to the [123] position.

Press the numeric buttons in the order of → → →

→ .

If you make a mistake, press and delete the incorrect number, then reenter the correct number.

Once you have finished entering the time, return the function/numerics toggle switch back to the [Function] position.

5 Press .

26