Epson EMP-TWD1 When the or indicators flash orange Warning, When the or indicators are off, Normal

When the or indicators flash orange Warning

: lit : flashing : off

	High-speed cooling in
			If there is no improvement
	progress
		Check the 2 items listed to the	when you press	and
Orange	You can continue projecting in
	this state. Projection stops	right.	switch the power on,
		• Move this unit away from the	discontinue use and
Green	automatically if subsequent
		wall by at least 20 cm.	disconnect the power cable
	high temperatures are
		• Clean the air filter.	from the electrical outlet.
	registered.
		s page 56	Contact your dealer.
			s page 65

Orange

Lamp replacement notification

It is time to replace the lamp. Replace the lamp with a new one as soon as possible.

If you continue use when in this state, it is possible that the lamp may explode. s page 58

Green

When the or indicators are off Normal

: lit : flashing : off

			Standing-by	Shows that this unit is ready to be used.
Orange		Orange
			Warming up	In warm-up mode pressing		or	has no effect.
Green Green Green			(approx. 20 seconds)	Do not turn off the power or unplug the unit during warm-up, as this
				may reduce the lifespan of the lamp.
			Projection in
Green Green		Green	Progress
				The operation of all remote control and main unit buttons is suspended
			Cooling down	during cool-down.
				Enters stand-by mode once cool-down has completed.
			(approx. 9 seconds)
Green	Orange			Do not turn off the power or unplug the unit during cool-down, as this
				may reduce the lifespan of the lamp.
			Break	Press	to return to normal playback.
Green Green		Green

Appendix

53