![](/images/new-backgrounds/1105002/105002333x1.webp)
EPSON | Revision A |
5.2 USB ID Input
Since this USB ID information is stored on EEPROM on the MAIN Board of the printer, you have to
CAUTION When you repair the printer and information.
The program for USB ID input and the supported operating environment are as follows:
Program
PagePrinter_Ver10E.exe
Operating environment
| OS: | Win95 OSR2.0 or later / Win98/WinMe/2000/XP |
| Port used: | LPT1 ~ LPT3 (Windows95/98) |
Model specific number
5.2.1 Installation Procedure for Program
Copy the adjustment program file onto the desktop or into a folder.
CHECK | The program does not run only with “PagePrinter_Ver11J.exe”. |
POINT | Therefore, be sure to copy also the files in the same holder. |
|
|
5.2.2 Procedure for Program Operation
CAUTION Do not start the adjustment program before connecting the parallel cable to the printer.
This program can not be executed together with EPSON Status
Monitor on Windows 95/98. Be sure to terminate the EPSON Status Monitor before starting the adjustment program.
If the power to the printer is turned off or the parallel cable is disconnected during running of the adjustment program, be sure to restart the program.
On the “Details of Display” tab of “Property of Screen”, do not change “font size.”
Once you have set or input a USB ID, never forget to verify it.
1.When you execute the program, the menu window shown below will appear.
2.Select the model name and interface, and click the OK button.
Figure 5-1. Model Select Screen (Start Initial Screen)
Adjustment | USB ID Input | 167 |