Epson EPL-6200L service manual Printer Setting Items, Function Setting

EPSON EPL-6200/EPL-6200L Revision A

1.6.2 Printer Setting Items

A list of setting items for this printer is shown below.

†Setting Items for which the Printer Stores the Changed Settings

	Table 1-52. Function Setting (1)
Setting item		Setting values
Sleep Mode		ON, OFF *1
Toner Out Error		Continue, Stop
Physical OffsetTop *2		-3.5 ~ 0 ~ 3.5 (mm) step 05.mm
Physical Offset Left *2		-3.5 ~ 0 ~ 3.5 (mm) step 05.mm
Humidity *2		Normal, High

Note : Values shown in bold and underlined characters are the factory default setting values.

Note “*1”: 15 minutes.

“*2”: These setting operations are not opened to users.

For setting method, see “Special Operation (EPL-6200L)(p.54)”.

†Setting Items that are Valid only in the Job, and are not be Stored in the Printer

Users can select setting items on the printer driver, and actual processing is performed by the printer.

	Table 1-53. Function Setting (2)
Setting item		Setting values
Paper Size		A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, C10,
		DL, C5, C6, IB5, User defined size
		User defined size Width 76.2. ~ 216.0mm
		Length 127.0 ~ 355.6mm
Copies		1 ~ 999
Toner Save		ON, OFF
Top Offset		-9 ~ 0 ~ 9 mm
Left Offset		-9 ~ 0 ~ 9 mm
Paper Type		Normal, Thick-Wide, Thick-Narrow Transparency
Density		1, 2, 3, 4, 5
Auto Continue		ON, OFF
Ignore Paper Size		ON, OFF

†Setting Items Requiring Administration by the Printer for each Printing or state change

Table 1-54. Function Setting (3)

Administrative		items Range of values
*Total Pages	0	~ 99999999 pages
*Jam Counts	0	~ 65534 times
*Genuine Toner Change	0	~ 254
*Non genuine Toner Change	0	~ 254
*Toner Life counter	0	~ 100%
	(Both 3K and 6K will reset to 100% by counter reset)
*Photoconductor Life counter	0	~ 100%
*USB ID
MP Tray Paper Size	A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON,
	C10, DL, C5, C6, IB5, User defined size
Interface mode of Parallel I/F	ECP, Nibble
Firmware version
*Registration position	-5.98 ~ 5.98 mm step 0.46mm
(paper feed direction)
CSIC items

Note : The “*” means that those items are under control of EEPROM.

CHECK	Since character strings administrated in the printer do not exist,
POINT	names of setting items and setting values are described in names for
	explanation. Consequently, these names do not match character
	strings displayed in driver's user interfaces and the Status Sheet.

Product Description Control Panel (EPL-6200L) 48