Epson EPL-6200L service manual Electrical Features, Temperature and Humidity Conditions

EPSON EPL-6200/EPL-6200L Revision A

1.2.6Storage and Transport of the Printer Main Unit and Optional Products (Consumables Packaged)

†Temperature and Humidity Conditions

Table 1-30. Temperature and Humidity Conditions

	Temperature	Humidity	Warranty Period	Others
	(°C)	(%RH)
Normal	0∼35	30∼85	18 months
Conditions
	High temperature:	High humidity:		No condensation
Severe	35 ∼40	85∼95	1/30 of
Conditions	Low temperature:	Low humidity:	warranty period.
	-20∼0	10∼30

†Transportation Barometric Pressure

61.3 ~ 101.3 kPa or more (460 ~ 760 mmHg)

†Dropping

No abnormalities according to JIS Z0200-1998 Level 1

†Vibration

„	Frequency:	5 ~ 100Hz (Sweep time: 10 minutes)
„	Acceleration:	1G

„Direction of application: 3 dimensional

„ Time of application:	60 minutes along each X, Y, Z axis,
	180 minutes in total

1.2.7 Electrical Features

†Fast Transient / Bursts (AC Line Noise) IEC 61000-4-4 compliance

Voltage 1 k: no malfunction occurs such as defective image quality. 2 kV: no damage to parts allowed.

†Instantaneous Outages

DIP 100% (at rated current - 10%) one cycle. No effect on printing quality

†Resistance to Static Electricity (IEC 61000-4-2 compliance)

„Direct contact discharge: 4.5 kV

„Indirect contact discharge: 4.5 kV

„ Aerial discharge: 8.5 kV

NOTE: Even when electric discharge as mentioned above occurs, the printer shall keep operating normally without any trouble which affects the basic performance or which can lead to breakdown of the printer.

†Inrush Current: 50 A or less (0-peak)

†Insulation Resistance: 10 MΩ or more (at DC 500 V)

†Dielectric Strength

No break down during application of the voltages shown below for one minute.

		Across primary and chassis
	For 100 V models	AC 1000 V
	For 110 to 127 V models	AC 1000 V
	For 220 to 240 V models	AC 1500 V
† Leak Current

Intended Market	Leak Current
100 V (Japan)	0.25 mA or less
110 to 127 V models	3.5 mA or less
220 to 240 V models	3.5 mA or less

Product Description Basic Specifications 30