![](/images/new-backgrounds/1105002/105002121x1.webp)
EPSON | Revision A |
1.11 Status Sheet
<EPL-6200>
A sample of the Status Sheet is shown at right.
The following information is printed at bottom left in the order of 1) to 8):
1). IA followed by firmware version shown in the DDYM format
For M (month), “A” represents October, “B” November and “C” December 2). Negotiation result of IEEE1284
e:ECP, n: Nibble, or none: Compatibility or not connected 3). Device type of code ROM
*: Flash or none: Mask
4).
JXXXXXX
5). The number of times the Developer Cartridge (toner cartridge) was replaced: “ICXXX YYY”
The number of digits depends on the replacement count.
X:The number of times the genuine Developer Cartridge (toner cartridge) was replaced with a new one. Counting is continued until a maximum of 999 new cartridges are installed. The Developer Cartridge that has been installed in any printer once is not regarded to be a new one even if it has never been used for printing.
Y:The number of times the
6). USB ID (24PXXXXXXXXXXXXXXX)
7). The latest connection status of USB communicate mode F: FS, or none: no connection with USB
8).
Product Description | Status Sheet | 61 |