EPSON | Revision A |
CAUTION Verify the registration position at both left and right side of the pattern.
When printing a test pattern chart, make sure that the edge
guide of paper tray is properly aligned against the edge of paper in order to avoid possible skew with fed paper.
7.If the position is shifted, input the measured distance value in [Input] box and click [Input] button to store the value on the main controller.
CAUTION
If the input value is within the tolerance of adjust value, the program displays a message and the value on the main controller remains unchanged.
8.Click on [Print] button to print the pattern again with the specified correction value. If further adjustment is required, go to <step 6> to repeat adjustment.
9.When the adjustment is finished, click on [Quit] button to terminate the program.
10.Turn off the printer.
Adjustment | Feed Registration Adjustment | 171 |
