Epson service manual Epson EPL-6200/EPL-6200L Revision a

EPSON EPL-6200/EPL-6200L Revision A

†Front Cover Open

„Description

Font printer cover is open.

This error is cleared when the cover is not detected to be open any longer.

„Remedy

When the cover is closed, the error is cleared, and the pop-up display of the EPSON Status Monitor disappears accordingly.

†Exit Cover Open

„Description

Output Cover is open.

This error is cleared when the cover is not detected to be open any longer.

NOTE: The printer displays an Exiting Paper Jam status if the Output Cover is open at power on.

„Remedy

When the cover is closed, the errors disappear, and the pop-up display of the EPSON Status Monitor disappears accordingly.

†Paper Set

„Description

Since the paper size specified by Paper Size setting differs from the paper size recognized by the size detected by printer itself, operation stops before printing.

The Continue command of the ESCPAGES-02 protocol clears the error in the printer engine, and the error in the printer is cleared accordingly. The ResetPrinter command releases the error in the printer engine resetting the printer to the initial status.

This error does not occur when the specified paper size is an undefined paper size, and when “Size Ignore = ON” or “Auto Continue=ON” is selected. This error occurs only once in one document.

„Remedy

Insert appropriate paper, and select [Continue] on the EPSON Status Monitor. To reprint after modifying driver settings, select [Cancel Printing] on the EPSON Status Monitor.

†Invalid Size

„Description

Since an unsupported paper size was specified or a different feeding direction, such as A4 Long Edge Feed, was selected, operation stopped before printing. The Continue command of the ESCPAGES-02 protocol clears the error, and printing resumes from the next page. When “Auto Continue = ON” this error dose not occur and the page is printout.

Printing will be achieved if the printer driver can clip the image to A4. Therefore, this error will not occur when you use a proper printer driver.

„Remedy

To print pages after “Invalid Size”, select [Continue] on the EPSON Status Monitor.

To reprint after modifying driver settings, select [Cancel Printing] on the EPSON Status Monitor.

†Print Underrun

„Description

Data was not sent from the host during processing of a document and time-out occurred. Then printing began, but the band data is insufficient. Resetting the printer to the initial status by the ResetPrinter command of the ESCPAGES- 02 protocol clears the error.

When “Auto Continue = ON” is set and printer can not printout the page “Print Failure” is displayed instead of the error, and resumes printing the next page.

This error does not occur when “Auto Continue=ON” or “Avoid Page Error = ON” is selected.

„Remedy

If data receiving is not completed, selecting [Reprint] on the EPSON Status Monitor performs printing successfully in some cases, as a result that the printer driver resends data without a flying start.

To reprint after modifying driver settings, select [Cancel Printing] on the EPSON Status Monitor.

†Mem Overflow

„Description

Printing was not successful since the data for one page was not saved due to insufficient memory at printing operation without flying-start or printing was not successful because of insufficient memory at a flying start resulting from

Product Description Control Panel (EPL-6200L) 52