Connecting the S-Video Cable

Before you start, make sure your document camera and projector or TV are turned off.

1.Connect one end of the S-video cable to the document camera’s

S-VIDEO OUTPUT port.

Projector

or

note

For best image quality when projecting a computer image, connect your projector or monitor to the document camera using the RGB OUT port.

S-VIDEO OUTPUT port

TV

2.Connect the other end to the S-video input port on the projector or TV.

Connecting to a Computer

The document camera comes with two RGB video input ports. These can be used to connect up to two laptops or desktop computers to the document camera.

This is especially useful if your projector has only one input port. You can connect one or two computers to the document camera’s RGB input port(s) as described below, and connect the document camera to the projector’s input port as described on page 16. This way, you can use the camera’s remote control to switch between picture sources. Follow the instructions on page 24 to switch between the sources.

18Setting Up the Document Camera