note

The auto focus function works up to a height of approximately 3.9 in.

(10 cm) above the stage surface.

Manually focus the image

PAUSE

2x

SET PRESETCALL

SET IMAGE CALL

POSI/NEGA

COLOR/B&W

UPPER LAMP BASE

MAIN

INPUT

RGB1

RGB2

TELE ZOOM WIDE

NEAR FOCUS FAR

NORMAL

OPEN

CLOSE

AF

 

IRIS

Enlarge or

Automatically

reduce the

focuses the

image

image

Zooming and Focusing Your Image

Use the Tele button on the document camera or remote control to enlarge the image, and use the Wide button to reduce it. The document camera will automatically focus the image.

If you change items on the stage, press the AF button on the remote control or the AUTO FOCUS button on the document camera to focus the image. The indicator light on the document camera flashes until the image is focused.

The following objects may not focus well using the auto focus feature:

■Objects with little contrast

■Objects with a bright background or excessive contrast

■Objects with fine repeated patterns or stripes

■Objects that glitter or reflect bright light

■Objects with varying depths of field

To manually focus these objects, use the NEAR or FAR button on the remote control. Additionally, use these buttons if you want to focus on a particular part of a three-dimensional object on the stage.

INPUT

 

PAUSE

OPEN IRIS CLOSE

 

WHITE

IMAGE

LAMP

RGB1

AUTO/MANUAL

BALANCE

ROTATION

MAIN

 

 

 

 

 

 

UPPER / BASE / OFF

 

RGB2

CLEAR MODE

 

 

CONTRAST

POSI / NEGA

 

 

 

 

TELE ZOOM WIDE

AUTO FOCUS

 

 

 

Enlarge or reduce the image

Automatically focuses the image

26Using the Document Camera