Epson FG01281 Switching between Color and Black and White, Freezing the Image

Switching between Color and Black and White

Sometimes you may want to switch to a black and white image. For example, a black and white display allows you to project text without color interference, resulting in a sharper image.

To switch from color to black and white, press the COLOR/B&W button on the remote control. Press it again when you want to switch back to color.

	PAUSE
	2x
	SET PRESETCALL	SET IMAGE CALL
	POSI/NEGA COLOR/B&W	UPPER LAMP BASE
Switches between	MAIN INPUT	RGB1	RGB2
color and black and
white display	TELE ZOOM WIDE	NEAR FOCUS FAR

NORMAL OPEN CLOSE AF

IRIS

Freezing the Image

During a presentation, it may be necessary to change the material you are displaying. Press the PAUSE button before switching your material. This freezes the image on screen, allowing you to change your material. When you are ready to display the next item, press the Pause button again.

PAUSE
Freezes the image
2x
SET PRESETCALL		SET IMAGE CALL
POSI/NEGA	COLOR/B&W	UPPER LAMP BASE
MAIN	INPUT	RGB1	RGB2
TELE ZOOM WIDE		NEAR FOCUS FAR
NORMAL	OPEN	CLOSE	AF
	IRIS

note

The pause feature only works when the document camera is in the MAIN display mode. It does not work when the document camera is in the RGB1 or RGB2 display modes.

Using the Document Camera 29