■Do not block or cover openings in the base, or insert objects through the slots. These openings are provided for ventilation to protect the document camera from overheating. Never place the document camera on a bed, sofa, rug, or similar surface. Do not place the document camera in a built-in installation, such as a bookcase or rack, unless proper ventilation is provided and the guidelines in this manual are followed.

■Place the document camera near a wall outlet where the plug can be easily unplugged.

Placez l’appareil près d’une prise de courant où la fiche peut être débranchée facilement.

■Use only the type of power source indicated on the document camera label.

■Connect the document camera to a properly grounded power outlet. Avoid using outlets on the same circuit as air control systems or other high-load devices that regularly switch on and off.

■If you use an extension cord with the document camera, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating. Overloading extension cords, power strips, or wall outlets can result in fire or electric shock.

■Follow the instructions in this manual to install batteries in the remote control. Never expose batteries to heat or flame, and never mix old and new batteries or batteries of different types. Do not use rechargeable Ni-Cd batteries, and do not try to recharge or short-circuit the batteries. Replace batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately. Dispose of used batteries according to local regulations.

■This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug (a plug having a third grounding pin). The 2-wire polarized plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. The 3-wire grounding type plug will fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

54Notices