Projecting Transparencies
The document camera enables you to project both positive and negative film with great clarity. Follow these steps:
1.Place your film or slides on the document camera’s stage with the dull side facing up.
2.Do one of the following to turn the upper lamps off and the base lamp on:
■Press the UPPER LAMP button on the remote control, and then the BASE LAMP button.
■Press the LAMP button on the document camera.
3.If you’re projecting negative film, press the POSI/NEGA button on either the remote control or document camera.
If you want to continue normal projection when you’re done, turn the base lamp off and the upper lamps on again. If you were projecting negative film, press the POSI/NEGA button again to return to normal display.
INPUT |
| PAUSE | OPEN IRIS CLOSE |
| WHITE | IMAGE | LAMP |
RGB1 | AUTO/MANUAL | BALANCE | ROTATION | ||||
MAIN |
|
|
|
|
|
| UPPER / BASE / OFF |
|
|
|
|
|
|
| |
| RGB2 | CLEAR MODE |
|
| CONTRAST | POSI / NEGA |
|
|
|
| TELE ZOOM WIDE | AUTO FOCUS |
|
|
|
Switches between | Turns the |
normal projection and | lamps on |
negative film projection | and off |
Switches between normal projection and negative film projection
PAUSE
2x
SET PRESETCALL | SET IMAGE CALL | ||
POSI/NEGA | COLOR/B&W | UPPER LAMP BASE | |
MAIN | INPUT | RGB1 | RGB2 |
TELE ZOOM WIDE | NEAR FOCUS FAR | ||
NORMAL | OPEN | CLOSE | AF |
| |||
IRIS
Turn upper lamps off and base lamp on
note
It may take a few seconds for the base lamp to come on.
Using the Document Camera 33