note
Camera settings remain in memory even when you turn the document camera off. However, saved images are deleted when the camera is turned off.
Saving Settings and Images
You can save up to eight groups of document camera settings for later use. That way, if you want to present the same type of materials (for example, negative film), you can quickly recall your settings with a simple push of a button.
You can also recall up to eight individual images captured by the document camera.
Assign a number to saved settings and images
PAUSE
2x
SET PRESETCALL | SET IMAGE CALL | ||
POSI/NEGA | COLOR/B&W | UPPER LAMP BASE | |
MAIN | INPUT | RGB1 | RGB2 |
TELE ZOOM WIDE | NEAR FOCUS FAR | ||
NORMAL | OPEN | CLOSE | AF |
| |||
IRIS
Press to save | Press to save |
and recall | and recall |
settings | images |
Saving and Recalling Camera Settings
To save your settings, press the PRESET SET button on the remote control, then press one of the numbered buttons between 1 and 8. The message PRESET x WRITE appears on the screen (where x is the number assigned to the group).
To recall a group of saved settings, press the PRESET CALL button on the remote control, then press the number of the group you want to use. The message MOVE x appears (where x is the number of the group) and the appearance of the screen changes to show your settings.
Saving and Recalling Images
To save a copy of the projected image, press IMAGE SET on the remote control, then press one of the numbered buttons between 1 and 8. The message MEMORY STATUS appears, followed by IMAGE x WRITE, where x is the number assigned to the image.
To recall a saved image, presson the remote control, then the number of the image you want to display. The saved image appears on the screen.
34Using the Document Camera