Turning the Lamps Off and On
Press the UPPER LAMP button on the remote control to turn off the lamps. Press it again when you want to turn the lamps back on. There will be a slight delay before the lamps turn back on.
Press the BASE LAMP button on the remote control to turn the base lamp on. Press it again to turn the base lamp off.
PAUSE |
|
|
|
|
2x |
|
|
|
|
SET PRESETCALL | SET IMAGE CALL |
| ||
POSI/NEGA | COLOR/B&W | UPPER LAMP BASE | Turn the lamps | |
|
|
|
| |
MAIN | INPUT | RGB1 | RGB2 | on and off |
| ||||
TELE ZOOM WIDE | NEAR FOCUS FAR |
| ||
NORMAL OPEN CLOSE AF
IRIS
Adjusting the Image
Once you see your image, you may need to make certain adjustments:
■To zoom or focus the image, see the next section
■To double the size of the projected image, see page 27
■If the image is too light or dark, see page 27
■To increase the contrast between the image and its background, see page 28
■If the image has a color cast, see page 28
■To rotate the image, see page 28
■To reduce noise in the image, see page 28
■To switch to a black and white image, see page 29
■To freeze the image, see page 29
note
You can also press the LAMP button on the document camera to move through this sequence: upper lamps off and base lamp on, upper and base lamps off, upper lamps on and base lamp off.
Using the Document Camera 25