Selecting the IBM Proprinter Mode

To set the FX-286 in the IBM Proprinter mode, you need to reset three DIP switches. Once the FX-286 is set in the IBM mode, the printer responds to commands like a Proprinter, and prints in the selected character set.

Reset the following DIP switches to select the Proprinter mode:

DIPFactory

Proprinter

switchSetting

Setting

1-4

ON

OFF

2-1

ON

OFF

2-3

OFF

ON

Printing the Alternate and All Print character sets

The IBM Proprinter has three character sets: Standard, Alternate, and All Print (see Appendix K for printouts of all three sets). Two of the sets, Standard and Alternate, can be selected with DIP switches. The third set, All Print, can only be selected with ESCape code ”\” or "^". See Appendix J for complete descriptions of these codes.

The DIP switch settings for the Standard and Alternate sets are:

DIP

 

 

Switch

Standard

Alternate

1-6

ON

Set any one of

1-7

ON

these three

1-8

ON

switches to OFF.

Running the self test in the IBM Proprinter mode

If you want to run a self test to see what the IBM Proprinter character sets look like, you only have to reset DIP switch 1-4from ON to OFF.

To run the self test, make sure the power is OFF, then hold down the DRAFT button while turning the power switch ON-the self test

A-3