Appendix C

Troubleshooting and Problem Solving

This appendix presents explanations of the FX-286’s advanced features and solutions for possible problems. If you have trouble or want to know more about some of the FX-286 features, consult the appropriate section in this appendix.

Troubleshooting

This section gives solutions to a few possible problems.

Double-spacing or overprinting

If your FX-286 double-spaces when you expect it to single-space, or if it prints all the lines on top of each other, change DIP switch 2-4. See Appendix A.

Paper loading

If you have trouble while loading paper, check these four items:

1.Move the print head to the middle of the platen. (Be sure that the printer is OFF when you do this.)

2.See that the pin-feed holders are set for the correct width. If you are not sure, try moving them slightly farther apart.

3.See that no bits of paper are caught in the pin-feed holders.

4.Make sure the paper release lever is open (pulled toward the front of the printer).

C-1