Epson FX-286e, FX-86e Environment, Parallel Interface, F-3, Shock, Signal, Humidity, Vibration, Temperature, Description, Technical Specifications, Storage: Up to 2 G within 1ms

EnvironmentTemperatureOperation: 40°F to 95°F (5 C” to 35 Co)Storage: -25°F to 150°F (-30 C” to 65 Co)HumidityOperation: 10% to 80% without condensationStorage: 5% to 85% without condensationShockOperation: Up to 1 G within 1msStorage: Up to 2 G within 1msVibrationOperation: Up to 0.25 G at up to 55HzStorage: Up to 0.5 G at up, to 55HzParallel Interface

Connector pin assignments and a description of respective interface signals are shown in Table F- 1,

Table F-I. Pins and signals

Signal	Return	Signal
Pin	Pin
- - .
	19
1		STROBE

220 DATA 1

3 2 1 DATA 2

422 DATA 3

52 3 DATA 4

62 4 DATA 5

72 5 DATA 6

8	26	DATA 7
9	2 7	DATA 8
	28
10			ACKNLG

	Description
IN	STROBE pulse to read data in. Pulse
	tiidth must be more than 0.5
	microseconds at the receiving
	terminal.
IN	These signals represent information of
IN	the 1 st to 8th bits of parallel data,
IN	respectively. Each signal is at HIGH
I N	level when data is logical 1 and LOW
IN	when it is logical 0.
IN
IN
OUT
	Approximately 12-microsecond pulse
	LOW indicates that data has been
	received and that the printer is ready
	to accept more data.

Technical Specifications F-3