If you want to change or check the lever, push it toward the platen (the black roller) until it stops. This is the first position. Then pull the lever toward you. You will feel three more click stops. The table below shows which position you should use.

Table 2-I. Paper thickness lever positions

PaperLever
thicknessposition

 

 

Single

2nd

With 1 copy

3rd

With 2 copies

4th

 

 

*Maximum total thickness IS 0.25mm

Position 1 is for thinner paper, and positions 5 and 6 are for thicker paper. These positions should rarely be used. If they are, the printing quality will not necessarily be as good as on paper as specified in the technical specifications.

Always return the lever to the second position when you resume printing on normal paper.

Choosing and Loading Paper

2 - 9