6.Fit the right side of the paper into the right holder, moving the holder as needed to match the width of the paper.

7.Close the right cover, making sure the paper has no dips or wrinkles and lock the right holder in place.

Now that you have loaded the continuous-feed paper, prepare the printer for printing.

1.Push the paper bail lever back.

2.Hold the paper guide above the printer with the edge tab on the left. Insert the right hinge tab into the right tab slot, as shown in Figure 1-10. Then insert the left tab into the left slot and push the guide back so that it is horizontal.

Figure 1-10

This guide keeps paper that is coming out of the printer from interfering with the paper going in. The guide is also used in the upright position for printing on single sheets of paper.

1-10

Setting Up Your FX Printer