Loading Continuous Paper with the Front Push Tractor

1.Make sure the printer is

turned off. Then open the front cover and the flap. Make sure the tractor is installed in the front push position. (You may need to move it from the rear push or pull position.)

2.Set the paper release lever to the front push tractor position. Also set the paper-thickness lever to the proper position for your paper’s thickness. See “Adjusting the Paper-Thickness Setting” on page 18 for instructions.

3.Release the left and right sprockets by pushing the blue lock levers backward.

4.Slide the left sprocket approximately

0.5 inch (12 mm) from the far left position and pull the blue lever forward to lock it in place. Then slide the right sprocket to match the width of your paper, but do not lock it.

10

5

0

Paper Handling

19