9.Reattach the front cover.

10.Turn on the printer.

11.Remove any slack in the paper by pressing the LF/FF button. (Always remove any slack from the paper; otherwise print quality may deteriorate.)

When the printer receives data, it will start printing at the current position without advancing the paper. If necessary, adjust the current position of the paper using the Micro Adjust function (described on page 32).

cCaution:

Never use the knob to adjust the top-of-form position; turning the knob when the printer is on may damage it or cause it to lose the top-of-form position.

12.Attach the printer cover by inserting the front tabs into the slots, then lowering the cover into place. Close the paper guide cover.

13.Send a print job to the printer. The printer starts

printing from the top-of-form position. After you finish printing, open the paper guide cover and tear off the printed document at the perforation nearest the paper exit slot.

Paper Handling

25