1.Make sure the paper guide is in the upright position. Then set the paper-thickness lever to 0 if you are using ordinary single-sheet paper. (If you are using envelopes, see “Envelopes” on page 29 to set the lever.)

Also move the paper release lever to the single-sheet position.

2.Turn on the printer, if necessary.

3.Slide the left edge guide

until it locks in place next to the triangle mark on the paper guide. Next adjust the right edge guide to match the width of your paper.

4.Insert a sheet of paper with the printable side down

between the edge guides until it meets resistance. The printer feeds the paper automatically and is ready to print.

If the first printed line on your page appears too high or low, you can use the Micro Adjust function to adjust the top-of-form position. See page 32 for more information.

Paper Handling

27