5.Remove the front cover by
pulling it straight down.
6.Make sure your
paper has a clean, straight edge. Then open both sprocket covers and fit the first four holes of the paper, with printable side up, over the tractor pins.
7.Close the sprocket covers.
8.Slide the right sprocket to remove any slack in the paper; then lock it in place by pushing the sprocket lock down.
9.Attach the front cover with
the continuous paper positioned as shown.
10. Make sure the paper guide is lying flat on the printer and slide the edge guides to the middle of the paper guide.
11.Turn on the printer. When the printer receives data, it automatically loads the paper and starts printing.
20Paper Handling