Epson LC-7211 user manual Removing the protective materials, Installing the platen knob

4Printer Setup

Removing the protective materials

Protective sheets and a piece of cardboard are inserted into the printer to protect components during shipping. Before using the printer, be sure to remove all packing material from inside the front cover as shown in the illustration.

Front cover

Cardboard

Protection sheet

Installing the platen knob

The platen knob is packed into a recess in the packaging material.

❏Install the knob on the shaft located inside the large hole on the right side of the printer. Make sure that the flat side of the shaft is aligned with the corresponding flat surface inside the knob’s spindle. Press the knob carefully but firmly into place as far as it will go.