Epson LC-7211 Paper loading, Line feed, Paper eject cut-sheet paper, Form feed fanfold paper

18Control Panel Operations

Paper loading

❏Prepare either cut-sheet or fanfold paper for feeding.

For details on how to prepare for paper feeding, see page 9 for fanfold paper and page 59 for cut-sheet paper.

❏The POWER indicator flashes to indicate there is no paper in the printer.

❏When using fanfold paper, press LF to feed the paper into the printer.

When using cut-sheet paper, insert the paper into the front of the printer using the left paper guide. The paper is automatically fed into the printer.

Line feed

❏Make sure the printer is off-line (ON LINE indicator is not lit).

❏Press LF once to feed paper one line. Holding down LF continually feeds paper, one line at a time, until you release the button.

Paper eject (cut-sheet paper)

❏Make sure the printer is on-line (ON LINE indicator is lit).

❏Press LF to eject the paper.

❏After the paper is ejected, the printer will beep and the POWER indicator will flash to indicate there is no paper in the printer.

Form feed (fanfold paper)

❏Make sure the printer is off-line (ON LINE indicator is not lit).

❏While holding down LF, press ON LINE to feed the paper to the top of the next page.

Parking fanfold paper

❏Make sure the printer is on-line (ON LINE indicator is lit).

❏Press LF to eject the paper.

❏After the paper is ejected, the printer will beep and the POWER indicator will flash to indicate there is no paper in the printer.

❏Later, you can press LF again to feed the paper back into the printer.