62
Chapter 10: Optional Accessory
This chapter explains how to connect and set up the following optional
accessory that is available for this printer:
❏Serial-to-Parallel Converter (SPC-8K)
Important!
Always make sure that printer power is turned off whenever installing or
removing optional accessories.
Connecting the Interface Converter
❏Unplug the printer from its AC power outlet.
❏Set the DIP switches on the SPC-8K to the settings you want to use before
you connect it to your printer.
See the following section for details on how to set the DIP switches
❏Plug the interface converter’s Centronics connector into the socket on the
side of the printer and secure it in place with the clips.
❏Plug one end of a serial cable into the serial interface connector’s 25-pin D-
TYPE connector.
Interface converter
Serial cable
Serial interface connector