Epson LX-1170 manual Note for German-speaking users

❏Unplug the printer before cleaning it, and always clean it with a piece of damp cloth only.

❏Do not spill liquid onto the printer.

❏Except as specifically explained in this guide, do not attempt to service the printer yourself.

❏Unplug the printer and refer servicing to qualified personnel under the following conditions:

i.If the power cord or plug is damaged.

ii.If liquid has entered the printer.

iii.If the printer has been dropped or the cabinet damaged.

iv.If the printer does not operate normally or exhibits a distinct change in performance.

❏Adjust only those controls that are covered by the operating instructions.

❏If you plan to use the printer in Germany, observe the following:

To provide adequate short-circuit protection and over-current protection for this printer, the building installation must be protected by a 10- or 16-amp circuit breaker.

Note for German-speaking users:

Bei Anschluss des Druckers an die Stromversorgung muss sichergestellt werden, dass die Gebäudeinstallation mit einer 10 A- oder 16 A-Sicherung abgesichert ist.

10Getting to Know Your Printer