Epson LX-1170 manual Using the EPSON Remote! Utility LX-300+ only, Installing EPSON Remote

Using the EPSON Remote! Utility (LX-300+ only)

The EPSON Remote! utility allows you to easily change the printer’s default settings from your computer’s DOS prompt.

Installing EPSON Remote!

Follow these steps to install the EPSON Remote! utility:

1.Insert the printer software CD-ROM into the CD-ROM drive.

2.At the DOS prompt, type D:\SETUP. (If you inserted the disk into a drive other than drive “D,” substitute “D” with the appropriate letter.) Then press Enter.

3.Select your printer’s name in the Printer Model window and then press Enter. C:\EPUTIL appears as the default directory.

4.Press Enter again. The EPSON Remote! utility is copied to the C:\EPUTIL directory.

Accessing EPSON Remote!

To access the EPSON Remote! utility, type C:\PRNSET at the DOS prompt and press Enter. Then follow the on-screen instructions to use this utility. You can also access the EPSON Remote! utility by typing C:\PANEL at the DOS prompt and then pressing Enter. The PRNSET and PANEL access methods differ slightly. The PANEL method opens a condensed version of EPSON Remote! that only provides the most often used settings.

1

1

1

1

1

1

1

1

1

1

1

1

Using the Printer Software 83