Epson RP-U420 manual Paper sensor commands ESC c

C O N F I D E N T I A L

ESC c 3

SETTING COMMAND

[Name]	Select paper sensor(s) to output paper-end signals
[Format]	ASCII	ESC	c	3	n
	Hex	1B	63	33	n
	Decimal	27	99	51	n

[Range]

[Default]

[Description]

0 ≤ n ≤ 255

n= 0

Selects the paper sensor(s) to output paper-end signals

•Each bit of n is used as follows:

Bit	Off/On	Hex	Decimal	Function
0	Off	00	0	Journal near-end sensor disabled
	On	01	1	Journal near-end sensor enabled
1	Off	00	0	Receipt near-end sensor disabled
	On	02	2	Receipt near-end sensor enabled
2-7	Off	00	0	Reserved

[Notes]	■	The command is available only with a parallel interface and is ignored with a serial interface.
	■	When all the sensors are disabled, the paper-end signal always outputs a paper present status.

Program Example

PRINT #1, CHR$(&H1B);"c3";CHR$(1); ← Journal near-end sensor enabled

RP-U420 Paper sensor commands ESC c 3 Ver. 1.0 p. 49