Epson RP-U420 manual Print commands FF, C O N F I D E N T I A L, Ver. 1.0 p

C O N F I D E N T I A L

FF

			EXECUTING COMMAND
[Name]
	Print and feed paper to print starting position
[Format]	ASCII	FF
	Hex	0C
	Decimal	12
[Range]	None
[Default]	None

[Description]	When DIP switch 1-7 is OFF (autocutter installed):
	When receipt is selected as the print sheet, prints the data in the print buffer and feeds to the next print
	starting position and cut (one point left uncut).
	When journal is selected as the print sheet, prints the data in the print buffer and feeds to the next print
	starting position.
	When DIP switch 1-7 is ON (manual cutter installed):
	When receipt or journal is selected as the print sheet, prints the data in the print buffer and feeds to the
	next print starting position.
[Notes]	■ This command is effective only in the Taiwan mode (when DIP switch 1-8 is ON). This mode can be set to
	the printer which is equipped with the Taiwan black mark sensor.
	■ This command is effective only when receipt or journal is selected as the print sheet.
	■ After the operation, the printer sets the print starting position to the beginning of a line.
	■ The paper is not fed when the paper is present at the print starting position or when the mark sensor
	detects the marked portion. The paper is fed when the paper is not present at the print starting position or
	when the mark sensor does not detect the marked portion.

Program Example for all printers

PRINT #1, CHR$(&H1B);"c0";CHR$(2); ← Select paper type

PRINT #1, "AAAAA"; CHR$(&HA);

PRINT #1, "BBBBB"; CHR$(&HC);

Print Sample

AAAAA

BBBBB

Cut receipt

RP-U420 Print commands FF Ver. 1.0 p. 29