Note for copying
❏When you make a copy using a control panel function, a moiré
❏The copied image may not have exactly the same size as the original.
❏Depending on the type of paper used, print quality may decline in the top and bottom areas of the printout, or these areas may be smeared.
❏If this product runs out of paper while making copies, be sure to load additional paper as soon as possible. If left without paper for a long period of time, the colors of the first copy made after reloading may not accurately reflect those of the original.
❏If the LCD panel indicates low ink while you are copying, you can either continue making copies until the ink runs out, or stop making copies and then replace the ink cartridge.
When placing a document on the document table
❏Keep the document table clean.
❏Make sure the document is flat against the glass surface; otherwise the image becomes out of focus.
❏Do not leave photographs on the document table for an extended period of time. They may stick to the glass of the document table.
❏Do not place heavy objects on top of this product.
When copying in Borderless layout
Because this layout enlarges the image to a size slightly larger than the paper size, the portion of the image that extends beyond the edge of the paper will not be copied.
To copy in 2-up Copy layout
1.Place the first page of the original document on the document table.
English
2.Select
3.Change the copy settings if necessary.
4.Press the x Color button or x B&W button. The first page of the original document is copied.
5.Place the following page of the original document on the document table when Change pages to 2 page(s) appears in the LCD panel.
6.Press the x Color button or the x B&W button again. The following page of the original document is copied and copying is completed.
Note:
If you need to stop copying, press the y Stop button.
If you want to make copies in the
Basic Copying | 11 |