Replacing Ink Cartridges

Note:

Before replacing an ink cartridge, read “Precautions on Ink Cartridge Replacement” on page 39 and “When handling ink cartridges” on page 3.

1.When the ink is empty:

Refer to the LCD panel message to see which ink cartridge is empty.

When the ink is low: Proceed to the next step.

2.Open the cartridge covers.

3.Remove an ink cartridge from its package.

4.Gently push in on the ink cartridge that you want to replace. Pull the cartridge out of this product and dispose of it properly. Do not take the used cartridge apart or try to refill it.

The illustration shows replacement of the light cyan ink cartridge.

wWarning:

If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If discomfort or vision problems continue after a thorough flushing, see a doctor immediately.

cCaution:

Leave the used ink cartridge installed until just before replacement; otherwise, ink remaining in the print head nozzles may dry out.

5.Insert the new ink cartridge slowly until it clicks into place.

6.Close the cartridge covers.

cCaution:

Never turn off this product while ink charging in progress; Otherwise, this will cause incomplete charging of the ink.

Note:

Do not repeatedly remove and reinsert the ink cartridge once it is installed.

If you install a used ink cartridge with a low ink level, it may become empty right after the replacement. In this case, replace the ink cartridge with a new one.

40Replacing Ink Cartridges