Printing Directly from an External Device

Printing Directly from an External Device

You can print images directly from an external device such as an MO drive, CD-R drive or USB flash drive, when connected to this product with a USB cable.

Note:

This feature is only available with images that have been backed up using this product. See “Copying images from the memory card to an external device (backup)” of the next section.

Not all of the devices that can be connected using a USB cable are supported. Contact your regional Customer Support for details.

1.Make sure that this product and the external device are switched off and that no memory card is loaded.

2.Use a USB cable to connect the external device to this product then switch them both on.

When using a USB flash drive, insert the drive directly into the USB port, and proceed to step 4.

3.Insert a medium that contains photo data into the external storage device.

4.When the following screen is displayed, select which folder to print from.

Back OK

5.Follow the same procedure as when printing from a memory card to perform printing.

Copying images from the memory card to an external device (Backup)

1.Follow steps 1 and 2 in “Printing Directly from an External Device” in the previous section.

2.Insert a medium into the external device.

3.Load a memory card.

& See “Inserting Memory Cards” on page 15

4.Press the Setup button.

5.Select Backup Memory Card.

Back OK

6.Confirm the following message, then press the OK button.

Back OK

7.Press the OK button again to start the backup.

38Printing Directly from an External Device