Basic Copying
Overview of the Basic
Procedure
1.Press the Copy button.2.Load appropriate paper.&See “Loading Paper” of the next section3.Place the original document.&See “Placing a Photo or Document on the Document Table” on page 74.Change the copy layout if necessary.&See “Changing the Copy Layout” on page 85.You can change the copy settings if necessary.&See “Changing Copy Settings” on page 96.Press the x Color button to copy in color, or x B&W button to copy in grayscale.
Note:
❏If you need to stop copying, press the y Stop button.❏Do not pull the paper out of this product.❏If the edge of the document is not copied correctly, place the document slightly away from the edge of the document table.
cCaution:Never open the scanner unit while scanning or copying; otherwise, you may damage this product.
Loading Paper
Note:
❏Always load paper before you start printing.❏The print result is affected by the kind of paper you use. For the best quality, use the appropriate paper.
❏Keep enough space in front of this product for paper to be fully ejected.❏Make sure the CD/DVD tray is not inserted in this product and the CD/DVD guide is closed.
Loading A4 plain paper into the front tray
Note:
Only A4 plain paper can be loaded into the front tray. When loading paper other than A4 plain paper, load into the back tray.
1.Open the front cover by pressing the hollow portion as illustrated.2.Fan a stack of paper, then tap it on a flat surface to even the edges.3.Load the paper with the printable side facing down flash with the right edge guide. Then, slide the paper into the front tray so that the edge of the paper is level with the guideline on the front tray.
English
Basic Copying | 5 |