Adjusting the print position on Photo Stickers sheet

1.Press the Setup button.

2.To move the image up or down, select Photo Stickers Position Up/Down. To move the image left or right, select Photo Stickers Position Left/Right.

3.Select the amount to move the image. Select the minus quantity when moving the image down or left, and the plus quantity when moving up or right.

Note:

You can select from –2.5mm to 2.5mm.

This product remembers the print adjustment settings even after it has been turned off, so you do not need to adjust the position each time you use the Photo Stickers function.

Printing on CD/DVD

This section provides information on how to use the LCD panel to print directly onto a CD/DVD, without the use of a computer.

Refer to the User’s Guide on the desktop if you are printing from a computer connected to the printer.

Note:

Use only CD/DVD media labelled as suitable for printing, for example “Printable on the label surface” or “Printable with ink jet printers”.

The printed surface is easily smeared immediately after printing.

Be sure to let CD/DVD dry completely more than 24 hours before using them or touching the printed surface.

Do not allow the printed CD/DVD to dry in direct sunlight.

Moisture on the printable surface may cause smearing.

If the CD/DVD tray or the inner transparent section are accidentally printed on, immediately wipe off the ink.

Reprinting on the same CD/DVD may not improve the print quality.

1.Load a memory card.

2.Load a CD or DVD.

& See “Loading a CD/DVD” on page 13

3.Press the Memory Card button.

4.Select Custom Print.

Back OK

5.Select CD/DVD.

Back OK

6.Change the print setting.

& See “Changing Print Settings” on page 28

22Printing Directly from a Memory Card – Printing Options