Troubleshooting
Error Messages
You can diagnose and solve most problems by checking the error messages on the LCD panel. If you cannot solve the problems by checking the messages, use the following table and try the recommended solution.
Note:
The solutions provided are for problems which may arise when using this product as a stand alone device. Refer to the Online User’s Guide for detailed solutions regarding printing, scanning, print quality, or
Error Messages | Problem | Solution |
|
|
|
Printer error occurred. Please see | An error has occurred in the | Turn this product off, and then back on. If the error |
documentation. | printer parts. | message still appears, contact your dealer. |
|
|
|
Scanner error occurred. Please see | An error has occurred in the | Turn this product off, and then back on. Then make |
documentation. | scanner parts. | sure the transportation lock is released. If the error |
|
| message still appears, contact your dealer. |
|
|
|
Service required. |
| Contact your dealer. |
Parts inside your printer are at the |
|
|
end of their service life. See your |
|
|
printer's documentation for details. |
|
|
|
|
|
Service required. |
| Contact your dealer. |
Parts inside your printer are at near |
|
|
end of their service life. See your |
|
|
printer’s documentation for details. |
|
|
|
|
|
Format error. | An error has occurred during | Retry the procedure. If the error reoccurs, there may |
| formatting. | be a problem with your memory card or storage |
|
| media. Check the media and try again. |
|
|
|
Clearing the Jammed Paper
If paper is jammed inside this product, an error message appears on the LCD panel. You may be able to clear the jammed paper using the Control Panel. Follow the instructions below.
1.Press the x Color button to eject the jammed paper. If the jammed paper is not ejected, go on to the next step.
2.Locate where the paper is jammed.
If the paper is jammed at the paper feeding position, remove all of the paper by hand.
If the paper is jammed at the ejecting position, remove the output tray. Remove all of the paper by hand, and then attach the output tray.
If the paper is jammed inside this product, press the P On button to turn off this product. Open the scanner unit and the CD/DVD guide. Remove all of the paper inside by hand, including any torn pieces.
3.After clearing the jammed paper, close the scanner unit and the CD/DVD guide, and then press the P On button.
4.Load a stack of paper in the front or back tray.