cCaution:
Do not push the paper too far. If you do so, the paper is not loaded correctly.
The paper is pushed past the guideline for A4 paper.
Some sheets of paper are pushed past the guideline for A4 paper.
4.Slide the left edge guide so that it meets the left edge of the paper.
5.Pull the output tray and slide out the extension.
Note:
❏You can load up to 150 sheets at a time.
❏You cannot use plain paper when Borderless has been selected in the Copy Layout.
Loading paper into the back tray
1.Open the feeder guard.
2.Pull the paper support and slide out the extension.
3.Open the front cover by pressing the hollow portion as illustrated.
4.Pull the output tray and slide out the extension.
5.Fan a stack of paper, then tap it on a flat surface to even the edges.
6.Load the paper with the printable side facing up and so it is against the right edge guide, then slide it into the back tray.
Note:
Always load paper into the trays by the short edge first.