If you are low on disk space and wish to specify what components to install, choose one or more of the following:

AT-Stylus COLOR

This driver allows you to use

 

the optional LocalTalk interface

 

to connect the printer to an

 

AppleTalk network.

Stylus COLOR

This driver allows you to use

 

the serial interface to connect the

 

printer directly to the Macintosh.

BI-D Calibration Utility

This utility calibrates the printer

 

so vertical lines are aligned.

EPSON Monitor

This utility monitors and manages

 

print jobs that have been sent to

 

the printer. For more information,

 

see “Using the EPSON Monitor

 

Utility to Manage Print Jobs” in

 

Chapter 2.

EPSON Namer

This utility assigns a unique name

 

to the printer.

You must install either the Stylus COLOR driver or the AT-Stylus COLOR driver. The three utilities are optional. If you do not install these utilities on your hard disk, you can run them from the diskette drive when needed.

4.Click Install to copy the software to your hard disk.

5.When installation is complete, choose Quit to quit the installer.

6.Restart your Macintosh.

7.If you installed the AT-Stylus driver, you need to assign a name to the printer using the EPSON Namer utility. See Appendix A for more information.

Setting Up the Printer 1-15