If you replaced the black cartridge, hold down the Alt button while you press the Load/Eject button. This cleans the black print head.
If you replaced the color cartridge, hold down the Alt button while you press the Economy/Condensed button. This cleans the color print head.
After you clean the print head, skip to step 12.
11.Press the Alt button again. The Pause light flashes as the printer charges the ink delivery system.
12.Close the printer cover. When the charging cycle finishes and the Pause light stops flashing and stays on, press the Pause button.
Transporting the Printer
If you need to transport your printer some distance, carefully repack it using the original box and packing materials as follows:
1.Open the printer cover and make sure that the print head is locked in the far right position. If it isn’t, turn on the printer, wait, and turn it off.
Caution:
c Do not remove the ink cartridges when transporting the printer. Transporting the printer without the cartridges installed can damage the printer.
2.Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer.
3.Remove paper from the input tray.