Hexadecimal Dump
This feature allows experienced users to see exactly what data is coming to the printer. This can be useful in finding software problems. When you turn on the hex dump function, the printer prints all commands and other data in hexadecimal format, along with a guide section to help you find specific commands.
To use the hex dump feature, follow these steps:
1.After you make sure the printer is off, open the cover.
2.Hold down the FEED button while you turn on the printer.
3.Close the cover.
4.Run any software program that sends data to the printer. The printer prints “Hexadecimal Dump” and then all the codes it receives in a
Hexadecimal Dump |
|
|
| |||||
1B | 21 | 00 | 1B | 26 | 02 | 40 | 40 | . ! . . & . @ @ |
1B | 25 | 01 | 1B | 63 | 34 | 00 | 1B | . % . . c4 . . |
41 | 42 | 43 | 44 45 46 47 48 | ABCDEFGH | ||||
❏A period (.) is printed for each code that has no ASCII equivalent.
❏During the hex dump all commands except DLE EOT and DLE ENQ are disabled.
5.Open the cover to set the printer off line, so that it will print the last line.
6.Close the cover and turn off the printer or reset it to turn off the hex dump mode.
