Line spacing default 4.23 mm 1/6 | Epson TM-T88II specs

Printing speed — Approximately 42 mm/ second

when a ladder bar (approximately 1.7’’/ second) code is printed:

Notes:

Printing speed may be slower, depending on the data transmission speed and the combination of control commands.

There may be variations in printing after switching the mode of the printing speed. To prevent this for logo printing, it is recommended that you use a downloaded bit image. (Changes in printing speed do not occur during downloaded bit image printing).

Paper feeding speed: Approximately 120 mm/second (approximately 4.72”/second) continuous paper feeding

Line spacing (default): 4.23 mm (1/6”)

Programmable by control command.

Number of characters: Alphanumeric characters: 95 International characters: 32

Extended graphics: 128 ⋅ 7 pages (including one space page)

Kanji characters: JIS-Level 1, Level 2 (JIS X0208-1990)

Character structure: Font A: 12 ⋅ 24 (including 2-dot spacing horizontally)

Font B: 9 ⋅ 17 (including 2-dot spacing horizontally)

Kanji: 24 ⋅ 24

Font A is the default

4-2Reference Information

Image 38

Epson TM-T88II user manual Line spacing default 4.23 mm 1/6, 2Reference Information

Contents

TM-T88II Series Printer Parts and Labels Labels Solving Problems Setting Up the PrinterInstalling and Replacing Paper Quick ReferencePage Iii EMC and Safety Standards AppliedProduct Name TM-T88II Model Name M129B For American Users CE MarkingFCC Compliance Statement Gereäuschpegel Reference Setting Up and UsingAbout This Manual Printing FeaturesIntroduction Application Software Options and Accessories Viii Introduction Ordering Paper and Supplies Specified Thermal Roll Paper NTP080-80 Kanzaki Specialty Papers, Inc Other Qualified Suppliers for Thermal PaperJujo Thermal Oy Finland Contents Appendix a DIP Switch and Paper Near End Settings Xii Unpacking Setting Up the PrinterSetting Up the Printer 2Setting Up the Printer Connecting the Cables and Grounding the PrinterConnecting the computer Connecting the Drawer 4Setting Up the Printer Anschließen der Schublade Connecting the Power Supply Grounding the PrinterPage Installing or Replacing the Paper Roll 8Setting Up the Printer Tear off the paper as shown Self Test Using the Power Switch Cover10Setting Up the Printer Running the self test Self test printing Please press the Paper Feed button Adjustments and Settings 12Setting Up the Printer Operating the Control Panel Using the PrinterUsing the Printer Control Panel 2Using the Printer Panel lights General problems TroubleshootingTroubleshooting Printing problems Printing is poor Error light is off, but nothing is printed2Troubleshooting Paper is jammed inside the printer Cleaning the print headPaper handling problems 4Troubleshooting Auto cutter problems Auto cutter is jammed 6Troubleshooting Hexadecimal Dump Abcdefgh 8Troubleshooting Reference Information Printing SpecificationsReference Information Line spacing default 4.23 mm 1/6 2Reference Information Paper Specifications Paper roll single-ply Size Consumption at Electrical CharacteristicsCurrent Environmental Conditions TemperatureReliability Life 6Reference Information DIP switch functions DIP Switch and Paper Near End SettingsSetting the DIP Switches Serial interface specifications 2DIP Switch and Paper Near End Settings DIP Switch and Paper Near End Settings A-3 Print Density Selection Parallel interface specifications 4DIP Switch and Paper Near End Settings DIP Switch and Paper Near End Settings A-5 Changing the DIP switch settings 6DIP Switch and Paper Near End Settings Adjusting the Paper Near End Detector DIP Switch and Paper Near End Settings A-7 8DIP Switch and Paper Near End Settings Page 1999.12