Epson V-1100 user manual Placement Guide, Screen Size, Width x Height, Height h1 Height h2

Placement Guide

Screen Size	Screen Size	Width x Height		Projection Distance		Height h1		Height h2
Designation (Inches)	(m)		(feet)	(m)	(feet)	(m)	(feet)	(m)	(feet)
36"	0.74 0.55		2.43 1.80	1.20	3.94	0.65	2.13	0.10	0.33
40"	0.81 0.61		2.66 2.00	1.32	4.33	0.72	2.36	0.11	0.36
60"	1.22 0.91		4.00 2.99	1.99	6.53	1.07	3.51	0.16	0.52
80"	1.63 1.22		5.35 4.00	2.65	8.69	1.43	4.69	0.21	0.69
100"	2.03 1.52		6.66 4.99	3.31	10.86	1.79	5.87	0.26	0.85
120"	2.44 1.83		8.00 6.00	3.97	13.02	2.14	7.02	0.31	1.02
150"	3.05 2.29		10.00 7.51	4.97	16.31	2.68	8.79	0.39	1.28
180"	3.66 2.74		12.00 8.99	5.96	19.55	3.21	10.53	0.47	1.54
200"	4.06 3.05		13.32 10.00	6.62	21.72	3.57	11.71	0.52	1.71

*There is a tolerance of ±5% due to design values.

*This table uses the lens apex and lens center as references and requires that the projec- tor be in a horizontal condition (with front and rear adjusters fully withdrawn).

Installation Height of Projection Screen [Reference]

Once the installation location and position have been decided, the projection height should be checked. In the case of large screen sizes, there are instances where the image cannot be projected within the floor to ceiling height.

The required installation height can be found using the following formula:

[Height from center of lens to top edge of the projection] m (feet) + 0.03m (0.1 feet) + Stand height

Example: Using a 150" 4:3 screen and placing the projector horizontally, the required installation height will be

2.68m (8.8 feet) + 0.03m (0.1 feet) = 2.71m (8.9 feet) (without a stand)

An installation room with a height of 2.4m (7.9 feet) will have insufficient room height even when the projector is placed on the floor. (Note that the rear adjusters can be raised to lower the projection screen image.)

Lens center	Screen size vertical dimension	Screen size top
		edge dimension
	h2 dimension	measured from
		floor
	Approx. 0.03m (0.1feet)
	Stand dimension

E-17