Color
Color System
This function sets the color system of the video signal. Normally, this should be set to Auto. Set this function when the system cannot be identified with Auto.
Select item name "Color System" and select the setting contents with the cursor ( ) buttons.
Auto | Automatic identification |
NTSC | Fixes the setting to NTSC |
PAL | Fixes the setting to PAL |
SECAM | Fixes the setting to SECAM |
Gamma | Normal |
Color Temp. | Normal |
| Color System | Auto |
Color Space
Set this function when a component signal (YCbCr orYPbPr) is projected and the image is extremely red or extremely green.
Select the item name "Color Space" and use the cursor ( ) buttons to select a color space setting that provides a normal im- age.
Selection contents at the time of YCbCr input
YCbCr601, YCbCr709, YCbCrSMPT
Selection contents at the time of YPbPr input
YPbPr601, YPbPr709, YPbPrSMPT
Gamma | Normal |
Color Temp. | Normal |
Color System | Auto |
| Color Space | YCbCr601 |
|
|
Gamma | Normal |
Color Temp. | Normal |
Color Space | YPbPr601 |
Note
*When the component signal undergoes conversion processing to red, green, and blue which express the image of the projector, the correct color cannot be reproduced unless a system compliant with the color difference conversion system of the input signal is used. Color Space serves to make this selection.
