Epson V-1100 user manual Installation, Power Supply, Cleaning, Lamp Replacement

IMPORTANT SAFETY INFORMATION

Important Safeguards

These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them carefully and heed all warnings.

Installation

•For best results, use the unit in a darkened room.

•Place the unit on a flat, level surface in a dry area away from dust and moisture.

•Do not place the unit in direct sunlight, near heaters or heat radiating appliances.

•Exposure to direct sunlight, smoke or steam can harm internal components.

•Handle the unit carefully. Dropping or jarring can damage internal components.

•Do not place heavy objects on top of the unit.

Power Supply

•The unit is designed to operate on a power supply of 100 - 240 V 50/60 Hz AC. Ensure that your power supply fits these requirements before attempting to use the unit.

•For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be accessible.

•Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire.

•Disconnect the power cable (mains lead) from the power outlet after using the unit. Before disconnecting the power cable, make sure that the POWER indicator lights in amber (not blinking or in green).

Cleaning

•Disconnect the power cable (mains lead) from the unit.

•Clean the cabinet of the unit periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner.

•Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.

•Clean the ventilation slots and speaker grills on the unit periodically using a vacuum cleaner. If accumulated dust blocks the ventilation slots, the unit will overheat, which may cause the unit to malfunction.

Use a soft brush attachment when using the vacuum cleaner. Do not use a hard attach- ment, such as a crevice tool, to prevent the damage to the unit.

Lamp Replacement

•Be sure to replace the lamp when the Status indicator comes on. If you continue to use the lamp after 1000 hours of usage, the lamp will turn off.

E-3