Epson V-1100 Preparing the Remote Control, Button Battery Replacement, Replacement Method

Preparing the Remote Control

Button Battery Replacement

Using the remote control for the first time

The battery compartment is fitted with a transportation insulation sheet at the time of shipping. Pull out the sheet and remove it. The remote control is now ready for use.

Replacement Method

Insert the tip of a ballpoint pen or some other pointed object into the hole of the

1 battery holder, then pull out to open.

2 Remove the old battery and install a new button battery with (+) side facing upward in the battery holder.

Purchase a CR2025 type battery for replacement.

MnO

2-L

iC

	H
	N
	A
	P
R2025OLT S
	A
	J
C	3V
ELL

CR2025

3 Insert the battery holder into the remote control and push in until the battery holder closes with a "click" sound.

MnO

2-L

i

	25
20		O
R
C	3V
CELL

H N A P A SJ

CR2025

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type (CR2025) recommended by the manufacturer. Dispose of used batteries according to your local regulations.

E-13