Epson V-1100 General Operation, Input Selection, When Auto Source is On, When Auto Source is Off

General Operation

This section describes the use of direct operation with the main unit or remote control buttons. For information about operation using the menu, see "Menu Operation Method" on Page E-37 and the various items on Pages E-46 to E-60.

Input Selection

This operation selects the input signal to be projected.

Main unit operation: Press the SOURCE button.

(It will not function while the menu or the quick menu is displayed.)

When Auto Source is On

If there is no input signal at the source that was previously used, the projector automatically selects another source that has the next input signal.

When Auto Source is Off

Each press of the button switches the selection one step in the sequence of Analog RGB → YPbPr → Digital RGB → VIDEO → S-VIDEO → YCbCr.

Remote control operation: Press the desired input se- lection button.

When Auto Source is On

When an input signal is not present at the selected source, the projector automatically selects the next source that has an input signal.

When Auto Source is Off

The projector switches to the selected source regardless of whether an input signal is present.

MENU

SOURCEAUTO

QUICK

MENU

ON POWER OFF

FREEZE MUTE PIP

DIGITAL RGB YPbPr

VIDEO S-VIDEO YCbCr

QUICK ASPECT AUTO

Note

*When you do not operate source selection, the projector will assume the input selection condition that was previously used.

*See "Auto Source" on Page E-55 for information about the Auto Source on and off conditions.

*YPbPr input selection will not be possible when YPbPr is set invalidly. See "YPbPr" on Page E-57.

E-28