Epson V-1100 When the STATUS Indicator is Lit/Flashes, E-61, STATUS Indicator POWER Indicator

When the STATUS Indicator is Lit/Flashes

When the STATUS indicator of the main unit operation panel is lit or flashes, notification is being given of the irregularities de- scribed.

STATUS indicator	POWER indicator
	STATUS	POW
			ER
POWER			MENU
	SOURCE
	QUICK		AUTO
	MENU
AUDIO
VIDEO

STATUS Indicator POWER Indicator Action to Take

The temperature has become abnormally high.

*The thermal protector is activated. if the room tem-

		perature is high, move the projector to a cool lo-
STATUS	POWER	cation. If the internal temperature of the projector
		is high, check the ventilation holes of the cooling
		fan and clean them if they are obstructed.

*When the thermal protector is activated, the power is switched off and even if the power is soon

Flashes red			Lit red				switched back on, the power might not actually
(0.5 s lit / 0.5 s off)							be supplied to the projector. Should this happen,
							wait one minute and then switch the power on
							again.
STATUS					POWER	The lamp will not light up.
						Wait one minute or longer while the lamp lighting volt-
						age irregularity detection protector is activated and
						switch the power on again. If the problem still per-
Flashes red						sists, unplug the power cable and contact your dealer.
(1 s lit / 1 s off)
	When the lamp burns out during operation: Flashes amber for 90 seconds
	and then is lit amber
	When the lamp does not light from the beginning: Lit amber
STATUS				POWER		The fan is stopped.
						Unplug the power cable and request service from your
						dealer.
Flashes red		Lit amber
(0.5 s lit / 0.5 s off)
STATUS				POWER		The lamp cover is open.
						The lamp cover is not attached properly.
						Attach it properly.
Flashes red			Lit red
(1 s lit / 1 s off)

E-61