Solutions When the Image is Fuzzy or Blurry
If the projected image is fuzzy or blurry, try the following solutions:
•Adjust the image focus.
•Clean the projector lens.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.
•Position the projector close enough to the screen.
•Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
•Turn on automatic keystone adjustment in the projector's menus.
•Adjust the Sharpness setting to improve image quality.
•If any bands or overall blurriness remain, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
•If you are projecting from a computer, use a lower resolution.
Parent topic: Solving Image or Sound Problems
Related references
Projection Distance
Image Quality Settings - Image Menu
Related tasks
Cleaning the Lens
Focusing the Image Using the Focus Ring
Solutions When the Image Brightness or Colors are Incorrect
If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
•Press the Color Mode button on the remote control to try different color modes for the image and environment.
•Check your video source settings.
•Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, Advanced, and/or Color Saturation.
•Make sure you selected the correct PC Signal or Video Signal setting on the Extended menu, if available for your image source.
113
