Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. The information displayed depends on the currently selected input source.
Note: The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours. Available settings depend on the current input source.
Information item | Description |
Lamp Hours | Displays the number of hours (H) the lamp has been used in each |
| Power Consumption mode; if the information is displayed in yellow, |
| obtain a genuine Epson replacement lamp soon |
Source | Displays the name of the port to which the current input source is |
| connected |
Input Signal | Displays the input signal type setting of the current input source |
Resolution | Displays the resolution of the current input source |
Scan Mode | Displays the scan mode (progressive or interlaced) |
Refresh Rate | Displays the refresh rate of the current input source |
3D Format | Displays the 3D format of the current input source |
Sync Info | Displays information that may be needed by a service technician |
88
